STM NUCLEO144 F439ZI board
The board used in this community contribution is the NUCLEO144 F439ZI board from STM. The board can be purchased from various sources and should be about 23 euros. Further information on this board and links for the user and programming manuals can be found at the product page in ST website.
Some basic information abstracted from ST:
- STM32 microcontroller in LQFP144 package
- External SMPS to generate Vcore logic supply (only available on '-P' suffixed boards)
- Ethernet compliant with IEEE-802.3-2002 (depending on STM32 support)
- USB OTG or full-speed device (depending on STM32 support)
- 3 user LEDs
- User and reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:
- USB with Micro-AB
- Ethernet RJ45 (depending on STM32 support)
- ST Zio connector including Arduino™ Uno V3
- ST morpho
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, virtual COM port and debug port
Flashing and debugging
This board has two micro USB connectors. One is exposing the embedded ST-Link interface that is used for flashing the nanoFramework firmware and for performing debugging on the nanoCLR code. The second is used to connect the device with Visual Studio allowing to deploy and debug your C# managed applications.
The current build is set to add support for single-precision floating point.
System.Math API supports only the
float overloads. The
double ones will throw a
Checkout the C# managed helpers available for this board.