Namespace Iot.Device.Bno055
Classes
- AxisSetting
Axis setting for a specific axis.
- Bno055Sensor
BNO055 - inertial measurement unit (IMU).
- Info
Information for the various sensor ID, firmware and bootloader versions.
Enums
- AxisMap
Axis map Orientation map is from documentation section 3.4 The dot is the one on the chip | Z axis | | / X axis |__/ Y axis / * | / /| _________ /|/ // /_____ // |____________|/.
- AxisSign
Axis signs.
- CalibrationStatus
Calibration status contains every variation from 00 to 11 for every sensor. The most interesting one is full success don't try to measure full success for all 4 elements at the same time The magnetometer is the one to really wait for calibration. Calibration is done automatically by the system.
- Error
BNO055 error.
- InteruptStatus
Interrupt state.
- OperationMode
Operation mode.
- PowerMode
Power mode.
- Status
Status.
- TemperatureSource
Temperature success.
- TestResult
Test result.
- Units
BNO055 unit.