Namespace Iot.Device.Pn532
Classes
- FirmwareVersion
PN532 firmware version
- Pn532
PN532 RFID/NFC reader
Enums
- BaudRate
Serial port baud rates
- DiagnoseMode
Diagnostic modes supported by the PN532
- ErrorCode
All errors that can be returned by the PN532
- OperatingMode
The operation mode 0b0000_0011 is reserved for future usage
- ParametersFlags
Parameters complementary of the Security Module Parameters Allows to change the behavior of the handshake with the card
- Port3
The GPIO state of the GPIO located on the P3 port Most of those ports can be used as external GPIO ports Refer to the detailed documentation page 79 and 80
- Port7
The GPIO state of the GPIO located on the P7 port Those ports can be used as external GPIO ports when SPI is not used Refer to the detailed documentation page 79 and 80
- RFConfigurationTimeout
The Radio Frequency configuration timeout
- RfConfigurationMode
Radio Frequency configuration mode
- SecurityAccessModuleMode
Security Access Module Mode
- SfrRegister
Specific SFR registers Please refer to documentation for detailed definition
- VersionSupported
All supported version for the NFC reader TODO: if more readers appear, this can be for sure place in common and more modes can be added
- WakeUpEnable
The modes for which the PN532 can be awake when sleeping