🌶️🌶️ to 🌶️🌶️🌶️ - Azure SDK sample pack

These samples are using Azure IoT Hub SDK to connect to Azure IoT Hub. For more information about the library you can check nanoFramework Azure.Devices.Client Library repository

Samples

• 🌶️🌶️ - Azure IoT Hub SDK with MQTT protocol
• 🌶️🌶️🌶️ - Complete Azure MQTT sample using BMP280 sensor
• 🌶️🌶️ - Azure IoT Device Provisioning Service (DPS) example
• 🌶️🌶️🌶️ - Azure SDK with X.509 CA Signed certificate sample using BMP280 Sensor

Build the sample

1. Start Microsoft Visual Studio 2022 or Visual Studio 2019 (Visual Studio 2017 should be OK too) and select File > Open > Project/Solution.
2. Starting in the folder where you unzipped the samples/cloned the repository, go to the subfolder for this specific sample. Double-click the Visual Studio Solution (.sln) file.
3. Press Ctrl+Shift+B, or select Build > Build Solution.

Run the sample

The next steps depend on whether you just want to deploy the sample or you want to both deploy and run it.

Deploying the sample

• Select Build > Deploy Solution.

Deploying and running the sample

• To debug the sample and then run it, press F5 or select Debug > Start Debugging.

Note

Important: Before deploying or running the sample, please make sure your device is visible in the Device Explorer.

Tip: To display the Device Explorer, go to Visual Studio menus: View > Other Windows > Device Explorer.