Table of Contents

🌶️ - Hardware ESP32 Deep sleep sample

Shows how to use the nanoFramework.Hardware.Esp32 API to access the ESP32 specific functions.

This example shows how to use change default pins for devices and to use the Sleep methods in the nanoFramework.Hardware.Esp32 nuget package. Putting the ESP32 into Deep sleep mode and waking it up after a set period plus other examples.

The sample is located here.

Hardware requirements

Any ESP32 hardware device running a nanoFramework image.

Reference

Build the sample

  1. Start Microsoft Visual Studio 2022 or Visual Studio 2019 (Visual Studio 2017 should be OK too) and select File > Open > Project/Solution.
  2. Starting in the folder where you unzipped the samples/cloned the repository, go to the subfolder for this specific sample. Double-click the Visual Studio Solution (.sln) file.
  3. Press Ctrl+Shift+B, or select Build > Build Solution.

Run the sample

The next steps depend on whether you just want to deploy the sample or you want to both deploy and run it.

Deploying the sample

  • Select Build > Deploy Solution.

Deploying and running the sample

  • To debug the sample and then run it, press F5 or select Debug > Start Debugging.

Important: Before deploying or running the sample, please make sure your device is visible in the Device Explorer. Tip: To display the Device Explorer, go to Visual Studio menus: View > Other Windows > Device Explorer.

Edit this page